Cut-in Branches are designed to facilitate the addition of new ductwork onto existing extraction installations.
DIAMETER Ømm |
FASTCLIP PART NO. |
THICKNESS mm |
80 |
26XXX-080 |
0.7 |
100 |
26XXX-100 |
0.7 |
125 |
26XXX-125 |
0.7 |
140 |
26XXX-140 |
0.7 |
150 |
26XXX-150 |
0.7 |
160 |
26XXX-160 |
0.7 |
180 |
26XXX-180 |
0.7 |
200 |
26XXX-200 |
0.7 |
224 |
26XXX-224 |
0.7 |
250 |
26XXX-250 |
0.7 |
300 |
26XXX-300 |
0.7 |
315 |
26XXX-315 |
0.7 |
350 |
26XXX-350 |
0.7 |
400 |
26XXX-400 |
0.9 |
450 |
26XXX-450 |
0.9 |
500 |
26XXX-500 |
0.9 |
560 |
26XXX-560 |
0.9 |
630 |
26XXX-630 |
0.9 |
710 |
26XXX-710 |
0.9 |
Larger diameter duct is available upon request.
Ø2 must be equal to or smaller than Ø1
For Y-Branches, Cut-in Branches and Reducers, quoting the FastClip Part Number when ordering will ensure correct specification of ductwork diameters.
The first two numbers are the URN for each product; 28 for Y-Branch, 26 for Cut-in Branch and 20 for Reducers.
For Y-Branches, the next 3 numbers are for Diameter Ø1, followed by a hyphen, then 6 numbers for Diameters Ø2 and Ø3.
For Cut-in Branches and Reducers, the next 3 numbers are for Diameter Ø1, followed by a hyphen,then 3 numbers for Diameter Ø2.
For Example:
Y-Branch
28250-200180
Cut-in Branch
26400-250
Reducer
20500-315